Neu-f NF.6501 Uživatelský manuál stáhnout pdf

neuf • 3300 Corte Malpaso • Camarillo, CA 93012 • 805.388.7171 • 805.388.0030 FAX

www.neu-f.com

AIR INTAKE KIT

2012-14 Fiat 500 Abarth

PART # NF.6501

INSTALLATION INSTRUCTIONS

PART LIST: 1 – Silicone Hose 1 – Aluminum Intake Tube 1 – Air Filter

2 - #32 hose Clamp 2 – Vent Line Connector 1 – M6 x 40mm Flange Bolt

2 – Wire Tie 1 – 15” x ½” Hose 1 – Vinyl Cap

1- Plastic Union

TOOLS REQUIRED: 1 – 10 mm Socket 1 – 8mm Nut Driver 1 – Screwdriver

1 – Spring Clamp Pliers

1. Disconnect the (2) vent lines attached to the

turbo inlet pipe.

2. Loosen hose clamps at turbo and air filter box

then remove turbo inlet pipe.

3. Using a screwdriver disconnect inlet duct from

air filter box.

4. Lift air filter box off rubber mounts to remove.

5. Disconnect valve cover breather hose.

6. Install the (2) vent line fittings and hose clamp

onto silicone hose then attach to turbo.

7. Using 10 mm socket, unbolt oil filler support

bracket.

8. Install hose clamp onto silicone hose, insert

supplied intake pipe into hose then mount on

top of oil filler support bracket using supplied

M10x40mm bolt.

1 2

neuf • 3300 Corte Malpaso • Camarillo, CA 93012 • 805.388.7171 • 805.388.0030 FAX www.neu-f.com AIR INTAKE KIT 20

neuf • 3300 Corte Malpaso • Camarillo, CA 93012 • 805.388.7171 • 805.388.0030 FAX www.neu-f.com 9. Attach vent lines and tighten hose clamps. 10.

Žádné komentáře

Neu-f NF.6501 Uživatelský manuál